Quick Answer: What Is The Best HDMI Audio Format?

Is PCM good sound?

PCM is generally a high-quality stereo (2 channel) format.

This would be appropriate to send to most soundbars which are also stereo playback devices.

If your soundbar supports surround or virtual surround, you should be sending a digital surround format that it is able to decode..

Should I set my TV to PCM or Bitstream?

Note: If you select Bitstream, but do not have a home theater system or soundbar connected, then the TV will process the audio in addition to outputting it. This can often result in reduced volume or other loss in audio quality. We recommend to select PCM when using the TV’s speakers.

Is PCM 5.1 surround sound?

PCM is uncompressed and can pass a full 5.1 signal. However you would need bitstream to pass any HD sources to a receiver from an Xbox or blu ray player to allow DolbyTrue HD or DTS MA HD, which is usually of a better quality than standard Dolby or DTS.

What is Spdif audio out?

S/PDIF (Sony/Philips Digital Interface) is a type of digital audio interconnect used in consumer audio equipment to output audio over reasonably short distances. The signal is transmitted over either a coaxial cable with RCA connectors or a fiber optic cable with TOSLINK connectors.

Should I use PCM or auto?

By setting HDMI audio output to AUTO, when playing a Standard DVD, the audio will be sent via Bitstream. If you watch an HD DVD, it will be sent via PCM. So AUTO is the best method for HDMI audio.

Can I get 5.1 from HDMI?

Technically, TVs aren’t allowed to send 5.1 audio over HDMI. In other words, if you’re watching a movie on Blu-ray with 5.1 Dolby Digital or DTS and it’s connected directly to your TV (Setup 1, above) your receiver might only be able to get 2.0 audio.

Which is better bitstream or PCM?

Bitstream is better, but for stereo source it is basically the same, except if your sources pcm decoding is bad somehow. For newer audio formats is bitstream always better. Up to 5.1 sound it’s your decision pcm or bitstream, over that choose bitstream.

Is PCM Dolby Digital?

Pulse-Code Modulation (PCM) and the Dolby Digital® technology refer to different types of digital audio recordings. PCM is the conventional method for converting analog audio into digital audio. … Dolby Digital® technology uses a 5.1 or six channel format.

What is the best way to setup a 5.1 surround sound?

5.1 surround sound In a 5.1 system, your surround speakers are best placed to the left and right of your listening position. Aim them directly towards you for the best sound. If side placement isn’t practical, place your surround speakers a few feet behind your listening position and face them forward.

How do I get 5.1 surround sound on my TV?

You may have to turn the optical output on and turn the TV speakers off. Check the TV manual on how to use the optical output. Select the optical input on the soundbar. You will now get surround sound on anything that plays on the TV if it is surround encoded.

How do I change my PCM to Dolby Digital?

Steps. Press the HOME button, then select [Settings]. Select [Sound] → [Digital Audio Out] → [Auto] or [PCM]. Select [Auto] if the device connected via DIGITAL AUDIO OUT (OPTICAL) is compatible with Dolby Digital.

Is HDMI audio better than optical?

The biggest difference is that HDMI can pass higher-resolution audio, including the formats found on Blu-ray: Dolby TrueHD and DTS HD Master Audio. These formats can’t get transmitted across optical. In terms of simplicity, HDMI also passes video signals.

Is PCM better than Dolby Digital?

Distinguished Member. Dolby Digital is compressed so PCM is better. Dolby True HD, DTS HD MA, Atmos and DTS X are also lossless, so should be similar quality to PCM. If the source audio is stereo, it should only be coming from your front left and right speakers unless you use an up mixer.

What’s better Dolby or DTS?

Dolby Digital compresses 5.1 digital audio down to a bit rate of 640 kbits/s (kilobits per second) for Blu-ray discs. For DVD discs, it supports a slightly lower bit rate: up to 448 kbits/s. DTS on the other hand, is less compressed and supports higher bit rates of up to 1.5Mb/s (megabits per second).

What is the best sound setting for Samsung TV?

Samsung – Recommended TV Audio SettingsSound Mode:Menu → Sound → Sound Mode → Set to StandardDialog Clarity:Menu → Sound → Sound Effect → Dialog Clarity → Set to OffEqualizer:Menu → Sound → Sound Effect → Equalizer → Set all values in the centerSRS TruSurround HD:Menu → Sound → SRS TruSurround HD → Set to Off6 more rows